Teltonika TAT100 Autonomous Asset Tracker Setup Guide
Configure the long-life battery autonomous asset tracker TAT100 with DriveWay IQ for containers, trailers, and cargo.
Quick Server Connection Parameters
setparam 2001:d.driveiq.win;2002:5027;2003:apnStep-by-Step Configuration
1. Open Case & Activate Battery
Unscrew the IP68 waterproof casing screws, insert a Micro-SIM card with PIN disabled, and remove the plastic battery pull-tab to power on the unit.
2. Configure APN & Server via SMS or Bluetooth
Send SMS configuration command to set APN and DriveWay IQ server address (replace internet with your APN):
setparam 2001:d.driveiq.win;2002:5027;2003:internet3. Configure Periodic Wake-up Interval
Set tracking reporting schedule (e.g., 1 ping per day for 3+ years battery life, or tracking on movement detection).
setparam 1000:864004. Register IMEI in DriveWay IQ & Mount
Add the 15-digit IMEI in DriveWay IQ. Place the tracker on your container, trailer, boat, or machinery using the built-in strong magnetic mount.
Start tracking on DriveWay IQ in 2 minutes
Connect your tracker, create geofences, and get real-time alerts. 14 days of Pro free.
Frequently Asked Questions & Troubleshooting
The replaceable industrial Li-SOCl2 battery lasts up to 3 years when sending 1 location report per day, or around 1,000 total GPS transmissions.
Works with hardware you already trust
Connect trackers from the world's leading manufacturers. Don't see yours? We can add it.
Teltonika FMC003
Teltonika FMC920
Teltonika TAT100
Add your manufacturer
Using different hardware? Tell us and we'll integrate it.